Welding gun & clamp
Gun or clamp selected to suit the pin type and size.
Welding Guns & Accessories
Match welding guns, clamps, CD stud welding collets and supporting accessories to your IFS-3600 pin welding setup.
Review welding tools, cables, CD stud welding collets and the copper holder used with Cup Head Pins. Collets can be ordered separately as spare parts; share the pin diameter and machine configuration.
- Matching machine
- IFS-3600
- Welding tools
- Gun / Clamp
- Spare parts
- Collets / Holders
CD stud welding collets can be ordered separately. Supply scope for other accessories is confirmed during consultation.
Tools & cables
Welding gun and
accessory specifications.
These components are shown for IFS-3600 setup planning. Confirm tool selection, connections and supply scope for the intended pin and machine configuration.
Welding tools and supporting components
| Welding gun / clamp | Selected according to pin type Confirm the tool and holder for the intended pin. |
|---|---|
| CD stud welding collet | Sized to the pin diameter Holds the CD weld pin in the welding gun. Available separately as a spare part. |
| Cup-head holder | Copper holder for use with the welding gun Used to hold the Cup Head Pin at the cup head; dimensions and fitting are confirmed for the order. |
| Power cable | 1 in each IFS-3600 configuration |
| Earth cable | 1 in each IFS-3600 configuration |
| Welding cables | Single-gun: 1 / Dual-gun: 2 |
| Earth clamp | Shown with the supplied equipment Confirm the exact component and supply scope. |
| Separate supply | Collets: available separately / Other components: confirmed during consultation |
Component details
Welding guns, collets
and cup-head holders.
The welding gun takes a collet sized to the CD weld pin, or a matching copper holder for Cup Head Pins. A clamp-type welding tool is also available.
CD stud welding collet
Holds the CD weld pin in the gun; sized to the pin diameter.
Copper cup-head holder
Holds the cup head during the welding operation.
Confirm the pin diameter, holder dimensions and connection before ordering. Collets are wear parts; keeping spares avoids stopping work when one wears out.
Equipment matching
Matching tools
to the IFS-3600.
These tools and accessories are presented with the IFS-3600. Provide the machine configuration and pin specification to confirm the required combination.
For Cup Head Pins, insulation is positioned first. The welding gun's copper holder holds the cup head while the pin tip passes through the insulation to contact the metal surface for welding.
For CD weld pins, the welding gun holds the pin in a collet matched to the pin diameter. Collets are wear parts: spatter and repeated welding reduce their grip and contact, so keep spares and replace a worn collet to maintain consistent welds.
A dual-gun setup can use two identical tools for the same pin type. Connections and holder dimensions must be checked for any requested replacement component.
Discuss tool matching ↗
Insulation Pin Welders
Review the single-gun and dual-gun IFS-3600 configurations and their cable quantities.
View product ↗
Cup Head Pins
Used with the welding gun and matching copper cup-head holder.
View product ↗
CD Weld Pins
Each pin diameter needs a matching collet in the welding gun.
View product ↗Before you order
Welding gun and collet FAQs.
Share the machine configuration, pin details and the component you need.
Can I order collets or other accessories separately?
Yes, CD stud welding collets can be ordered separately as spare parts. For other components, tell us the item and quantity so availability and supply scope can be reviewed.
How do I choose the right collet?
Choose the collet by pin diameter. Tell us the pin diameter and welding gun model, or send a photo of your current collet, so the size and fit can be confirmed.
When should a collet be replaced?
Replace it when it no longer grips the pin firmly or shows burning or spatter build-up. A worn collet gives poor contact and inconsistent welds, so keep spares on hand.
Which tool is used with Cup Head Pins?
A welding gun with a matching copper cup-head holder is used. Confirm the holder dimensions and fitting for the selected pins.
Can a dual-gun setup use two identical tools?
Yes. Two identical tools can be selected for the same pin type. The tool combination is agreed for the order.
What should I include in an accessory enquiry?
Include the machine, configuration, pin type and diameter, required component and quantity. For a replacement, provide the connection and holder dimensions or a reference image.
Contact IFS
Tell us what
you need.
Tell us which welding tool, collet or accessory you need, together with the machine and pin details. Our team can review compatibility and supply availability.
Chat on WhatsApp ↗